TITEBOND CONTRACTOR GRADE PROJECTS ADHESIVE


Titebond Contractor Grade Projects Construction Adhesive is a versatile formula designed for general purpose interior applications that bonds common building materials. It offers a long working time for precise assembly while remaining permanently flexible. This VOC-compliant, nonflammable formula is environmentally safe – emitting ...

more

Features & Benefits

check_circle
Recommended For: Interior construction, remodeling and repair projects.
check_circle
Compatible Materials: Common building materials including wood, trim, paneling, corkboard, plywood, hardboard, drywall, masonry & concrete, foam-back tub surrounds and ceramic tile repairs.
check_circle
Ideal for foamboard, plastics and interior projects
check_circle
Water-based
check_circle
Environmentally safe
check_circle
General purpose
check_circle
Cleans easily with water in wet state
check_circle
Offers freeze/thaw stability
check_circle
Cartridge and carton contain post-consumer recycled material
check_circle
VOC-compliant

Application Guidelines

Application Temperature:
40°F to 100°F (5°C to 38°C)
Service Temperature Range:
10°F to 120°F
Working Time:
Approximately 20 minutes for a 1/4” bead
Prep:
Surfaces must be clean and free of any material that may prevent adequate adhesion.
Application:
Cut tip on slant for 1/4” to 3/8” bead. Puncture inner seal and place in cartridge gun. Apply adhesive to one of the surfaces in either a continuous or spot bead. Paneling or foam: Apply 1/4” bead around perimeter 1” from edge and two zigzag beads in middle. Framing members: Apply directly to studs. Press materials firmly together with a slight twisting motion. Nail as needed. Drywall: Use fasteners in accordance with local building standards. Note: For large panels, bracing may be required until adhesive dries.
Cleanup:
Tools and adhesive may be cleaned with water while the adhesive is wet. If dried, tools and adhesive may be cleaned with water/acetone/vinegar mixture. Follow solvent vendor’s precautions.
Limitations:
Not designed for continuous submersion. One surface must be porous. For best results, store above 40°F.

Physical Properties

Type
Blend of polymer emulsions
State
Medium-viscosity mastic
Color
Beige
Solids
75%
Viscosity
160,000 cps
pH
7.0
VOC
< 70 g/L
Flashpoint
> 200°F
Freeze / Thaw Stability
Stable
Storage Life
18 months in an unopened container

Coverage

Size1/8” Bead1/4" Bead3/8" Bead1/2" Bead
10 Oz. Cartridge129 ft.30 ft.14 ft.8 ft.


Specifications & Certifications

  • Exceeds the performance requirements of the ASTM C557 and CAN/CGSB 71.25M specifications