Titebond Speed Set Wood Glue is an extremely fast-setting, high solids PVA adhesive. It provides exceptional gap filling properties developing a bond stronger than the wood itself. This product offers excellent sandability, unaffected by finishes, and increases productivity through its shorter clamp time with no increase in viscosity. Titebond Speed Set cleans up with water.

Features & Benefits

  • Extremely fast set – 15 minute clamp time
  • Excellent strength & durability
  • Visible under black light
  • Unaffected by finishes
  • Heat resistant – Sands easily
  • Easy water cleanup



Application Guidelines

  • Application Temperature: Above 59°F
  • Open Assembly Time: 2-4 minutes (70°F / 50% RH / 8% MC)
  • Total Assembly Time: 8-10 minutes (70°F / 50% RH / 8% MC)
  • Minimum Required Spread : Approximately 6 mils or 250 square feet per gallon
  • Required Clamping Pressure: Use only enough pressure to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods).
  • Method of Application: Any method can be used for spreading as long as Open and Total Assembly Times are met (see above).
  • Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.

Bond Strength ASTM D-905 (On Hard Maple)

Temperature Strength Wood Failure
Room Temperature 4,178 psi 77%
150°F. Overnight 1,527 psi 10%

Physical Properties

  • Type: Aliphatic resin emulsion
  • Calculated VOC: < 6 g/L
  • State: Liquid emulsion
  • Weight Per Gallon: 9.3 lbs.
  • Color: White
  • Dried Film: Translucent
  • Flashpoint: >200°F
  • Solids: 60%
  • Viscosity: 3,600 cps.
  • Freeze / Thaw Stability: Not stable
  • pH : 4.7
  • Chalk Temperature: To assure a good bond, 59°F is the lowest recommended temperature for the glue, air and materials during application and drying.
  • Storage Life: 24 months in tightly closed containers at 75°F. For best results, mix glue every 30 days to reduce settling.


Titebond Speed Set Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 59°F. Do not Freeze. Agitate adhesive monthly to reduce product settling. Adhesive is extremely fast setting. It is important to follow Assembly Time recommendations. Minimum clamp-time is 15 minutes. Longer clamp times may be beneficial. Read SDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

Product SKUs

Part NumberUPCCase UPCSizeWeightUnits Per PackagePackages Per Pallet
436090370834360992.15 Gallon PROjug21.91160
4363037083043631100370830436388 Oz. Bottle7.9912160
436603708304366210037083043669Gallon Jug19.67263
43670370830436795 Gallon Pail49.30124

Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.

2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583

Franklin International