Quickset 2000 is a water-based adhesive designed to bond HPL to wood-based substrates. It can be used in a variety of ways including continuous heated-panel laminating systems, pinch roll and dead stacking, or limited lay-up time cold-press operations. Quickset 2000 is a fast-setting adhesive that is suitable for post-forming applications when it is sprayed or applied inline with a post-former and immediately processed. It offers high green strength and high tensile strength.

Features & Benefits

  • Fast set - Superior strength
  • Bonds HPL to wood-based substrates
  • VOC compliant
  • Nonflammable - No offensive odor
  • Post-formable & high heat resistance

Application Guidelines

  • Application Temperature: Above 50°F (10°C)
  • Assembly Time After Glue Application: 15 minutes (70°F./50% RH)
  • Machinery : Designed for use with Black Bros. Panel Express, Evans series 4260 & 4600, Midwest Automation RP3140 & RP3170 continuous panel laminators. For limited lay-up time cold-press operations and pinch roll and dead stacking operations, the machinery options are many. Postforming equipment that spray adhesives and immediately process the panels are ideal.
  • Substrates: High pressure laminate to particleboard or fiberboard
  • Tolerances : Gluing stock should be uniform in thickness. Variation in thickness should not exceed ± .005 inches. Sanding to thickness should be performed using higher than 50 grit abrasives.
  • Spread : Generally, 35-50 pounds per 1,000 square feet of glue line (6-9 wet mils or 180-260 ft2/gal) is adequate. Conveyorized spreaders are commonly used in this application
  • Cleanup: Damp cloth while glue is wet. Scrape off dried excess.

Physical Properties

  • Type: Vinyl acetate ethylene copolymer emulsion
  • Reactive VOC: 2.4 g/L
  • State: Liquid
  • Weight Per Gallon: 9.15 lbs.
  • Color: Light blue
  • Dried Film: Translucent
  • Flashpoint: > 200°F
  • Solids: 62.5%
  • Freeze / Thaw Stability: Unstable
  • Viscosity: 4,350 cps
  • pH : 4.5
  • Chalk Temperature: To assure a good bond, 35°F is the lowest recommended temperature of the glue, air and materials during application.
  • Storage Life: 12 months in tightly closed containers at 70°F


Titebond QuickSet 2000 is specifically designed for use on applications with large surface areas. For this reason it is not suited for other types of assembly applications. Not recommended for continuous submersion or for use below the waterline. KEEP FROM FREEZING. For more information on specific applications, call our Technical Support Team at 1-800-347-4583.

Product SKUs

Part NumberUPCCase UPCSizeWeightUnits Per PackagePackages Per Pallet
618670370836186795 Gallon Pail48.54124
61868496 lbs. Metal Drum534.8014

Caution Statement

CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush eyes with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin persists, contact physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF REACH OF CHILDREN.

Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.

2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583

Franklin International